Campus Emulsion
Exterior Wall Paints
- 1LTS
- 4LTS
- 10LTS
- 20LTS
Opacity
Durability
Brightness
Gloss
Washability
Ensure that the surface is clean and free from dampness, dirt and other contamination.
Sand the surface using #180 Sandpaper and clean thoroughly. Ensure that no loose particles are sticking to the wall
Freshly plastered surfaces must be allowed to cure completely. The coating process can be started after a minimum period of 30 days.
Ensure that fresh walls are coated with one to two coats of white cement before initiating the painting process
Apply 1 – 2 coats of Wall Primer Exterior with an interval of 3 – 4 hrs between subsequent coats
Sanding of the first / second coat of Wall Primer Exterior can be done using #320 Sandpaper
Apply 2 coats of Campus Exterior Emulsion with an interval of 4 to 5 hours between subsequent coats. Sanding of the first coat of top coat can be done with #600 Sandpaper
The number of coats of top coat depends on the chosen colour
Darker shades may require additional coats
Stir well before thinning the Paint
Mix 40 – 45% of potable water
Greenpro certificate
We meet the requirements of GreenPro Ecolabel and qualify as Green Product.