Opacity
Brightness
Ensure that the surface is clean and free from dampness, dirt and other contamination.
Sand the surface using #180 Sandpaper and clean thoroughly. Ensure that no loose particles are sticking to the wall
For areas severely affected by algae and fungi, ensure that the surface is completely cleaned before initiating the painting process
Freshly plastered surfaces must be allowed to cure completely. The coating process can be started after a minimum period of 30 days.
For Interior Walls
Ensure that fresh walls are coated with one or two coats of white cement
Apply 2 coats of Altura Wall Primer with an interval of 4 – 5 hrs between subsequent coats
Undulations in the wall can be levelled using any good quality acrylic putty or cement based putty
Sanding of the first / second coat of Altura Wall Primer can be done using #320 Sandpaper
Topcoat can be applied after an interval of 4 – 5 hrs of the second coat of Altura Wall Primer
For Exterior Walls
Ensure that fresh walls are coated with one or two coats of white cement
Apply 1 to 2 coats of Altura Wall Primer with an interval of 4 – 5 hrs between subsequent coats
Sanding of the first / second of Altura Wall Primer can be done using #320 Sandpaper
Topcoat can be applied after an interval of 4 – 5 hrs of the second coat of Altura Wall Primer
Stir well before thinning the Paint
Mix 35 – 40% of potable water